TECHNICAL SPECIFICATIONS
The trainer is composed of four operating units, as follows:
MAIN MODULE
Dimensions 1000 x 650 x 1650 mm., front panel with the block diagram of the system. It contains the components for the circulation, storage and control of the liquid in the primary and secondary circuits. These components are placed vertically on a base, facilitating comfortable access to all parts for assembly and disassembly operations carried out during the practical sessions described in your handbook. The front control panel is placed in the top part of the main module and it is composed of: block diagram of the system, electronic control centre with an LCD screen for the visualization of the data, situation lights. The hydraulic sockets for cold water inlet, hot sanitary water outlet, connection to the solar panel, etc., are located at the back of the module. 2x SOLAR PANEL In this trainer there are two solar panels. The first one is a real solar panel placed in a metal structure and connected to the main module through flexible pipes, provided with discharge, safety and filling valves. The second one is a simulator of a solar panel supplied by the mains for the use in classroom. Both panels can be connected to the main module, one at a time.
CONVECTOR HEATER
As a means of applying the hot water produced, a convector heater is available for use. It is connected through flexible pipes. This component allows us to experiment with the effects of hot water obtained with this system. However, the system is sufficiently open to permit easy use with other applications, such as hot sanitary water supply, under-floor heating, etc.
Average training hours: 9
Approx. packing dimensions: 1.37 x 1.47 x 2.12 m.
Gross weight: 375 kg.
Net weight: 216 kg.
ALTERNATIVE: DL THERMO-A1
Trainer with a simulator of a solar panel supplied by the mains, instead of a real solar panel, to allow performing the practical exercises in a classroom.
ALTERNATIVE: DL THERMO-A2
Trainer with a real solar panel placed in a metal structure and connected to the main module through flexible pipes, provided with discharge, safety and filling valves.
