MANUAL COIL WINDER
To be fixed to the bench, it allows the manual winding of motor coil or of linear windings without wire guide.
Complete with a 300 mm diameter faceplate, a pair of square mandrels, a pair of 6 grooves straight arbors, 60 mm diameter, a central arbor for linear winding and a 5 digit revolution counter.
BOBBIN HOLDER WITH COLUMN
Column to be fixed to the bench, complete with bobbin holder with wire stretcher and two regulating springs.
Suitable for wires from 0.2 to 1.5 mm of diameter.
It is suggested as an accessory for the manual coil winder DL 1010B.
WINDING MACHINE FOR MOTORS AND TRANSFORMERS
Windings:
• coils for motors
• coils for transformers
Wires:
• Minimum diameter: 0.1 mm.
• Maximum diameter: 2 mm.
Coils:
• Maximum diameter of the coils: 180 mm.
• Maximum width of the coils: 200 mm.
Motor:
• Three‐phase motor with brake, 0.75 kW
Winding modes:
Both automatic and manual winding modes.
Wire guide with automatic displacement.
Dimensions: 700 x 700 x 1700 (h) mm
WINDING MACHINE FOR MOTORS
Windings:
• coils for motors
Wires:
• Minimum diameter: 0.1 mm.
• Maximum diameter: 2 mm.
Coils:
• Maximum diameter of the coils: 180 mm.
• Maximum width of the coils: 200 mm.
Motor:
• Three‐phase motor with brake, 0.75 kW
Winding modes:
Both automatic and manual winding modes.
Dimensions: 700 x 700 x 1700 (h) mm
