This teaching device is designed as follows:
BASIC MODEL (DL 8115EPB)
DL 8110P01: Sliding valve, adjustable filter with manometer and divider
DL 8110P11: Magnetic cylinder (SE) with retractable piston rod and throttle unit
DL 8115EP01: 3/2, 1 NC (YES) and 1 NO (NOT) electric pneumatic valves
DL 8115EP02: 5/2 electric pneumatic valve, double stabilized (1) and single stabilized with mechanical springs (1) and filters
DL 8115EP03: Double magnetic cylinder (DE) with throttle (2), magnetic sensor (2) and photoelectric sensor
DL 8115EP04: Double magnetic cylinder (DE) with throttle (2), magnetic sensor (2), induction sensor and capacitive sensor
DL 8115EP05: Module of stable power supply: 24Vdc, 2A
DL 8115EP06: Module has 6 push buttons (each contact has 1 normally open contact, 1 normally closed contact)
DL 8115EP07: Module with 3 relays (each relay has 4 normally open contacts, 4 normally closed contacts)
DL 8115EP08: The module has 4 lights, 2 timers (slow open and close slowly) and two switches (each switch has 1 normally open contact, 1 normally closed contact)
ADVANCED MODEL (OPTION: DL 8115EPA)
DL 8110P06: Manometer and bidirectional flow regulator
DL 8115EP09: Pressure regulator, regulator (1) and pressure control (1), 1 normally open contact, 1 normally closed contact
DL 8115EP12: Electronic scale controllers and digital pressure regulators
NOTE: The DL 8115EP pneumatic power module can be connected to PLC, such as DL 2110ATN.
ACCESSORIES: Pneumatic and electric modules require an air compressor such as: 8110SLZ.
PLC
With 8 digital inputs, 6 relay outputs, 2 analog inputs and 2 analog outputs, panel type. It can be assembled on De Lorenzo’s frame. Provided with programming software.
DL 8110SLZ AIR COMPRESSOR MODEL
Very low noise with small power.
Tank capacity: 24 liters
Air intake: 50 liters / minute.
Maximum working pressure: 8 bar or 116 PSI
Engine power: 0.34 Kw or 0.45 HP
Noise level: 40 dB
Dimensions: 40 x 40 x 60 (h) cm.
Weight: 25 kg.
