This teaching device has the following design:
- Hydraulic table with metal working table with holes for clamping hydraulic parts without using additional tools, 4 wheels and 3 drawers to store parts.
Hydraulic power unit assembled on metal structure, under control panel; 4.5 liters / minute, noise level 60 db – 1 meter, pressure reducing valve, oil level viewfinder, air filter, oil return filter, 1 pressure gauge, 30 liter oil tank, control box with Two on-off buttons and motor overload protection.
Pressure reducing valve 2… 125 bar (2 off)
One-way throttle
Ball valve lock
Two-way throttle
“T” splitter with pressure gauge
Dividers 4
Adjust the flow of one-way pressure compensation
4-pipe divider with 0 .. 100 bar pressure gauge
One-way limiter (check valve)
Double acting cylinder
Piloted one way
Manual valve 2/2, spring return
3/2 hand valve, spring return
Manual valve 4/2, reversed by spring
Manual valve 4/3 central spring
Set of pipes for testing pressure drops
Set of 12 tubes with quick connector - Theory book and practice
OPTIONAL, ABILITY TO ADD TO THE FOLLOWING DEVICES (DL 8110H 2) FOR ADVANCED HYDRAULIC TABLES:
- 4-pipe divider with 0 .. 100 bar pressure gauge
3-way pressure reducing valve 2 ..125 bar
Pressure reducing valve with spool and camping, 2… 125 bar
Pressure reducing valve with spool and piloted, 2 … 125 bar
Hydraulic motor, with wheel axle
Double acting cylinder, 32, 16, 200mm stroke
2/2 ball valve, spring return
Counter – weight 30 Kg.
Accumulate hydraulic diaphragm, 2 manual valves and 1 protective valve - Set of 10 tubes with quick connector
MORE OPTIONS FOR HYDRAULIC TABLES (DL 8110EH) MAY ADD INTO HYDROPOWER DEVICES:
- Electronic power module, overload protection and short-circuit protection
Controller, with 4 push buttons, 1 switch, 1 electronic timer that closes / disconnects, 4 ignition diodes, 4 indicator lights
Relay module, with 3 relays with 4 pairs of contacts, on ‐ off light on each relay coil, de-sparking diodes on each suction coil, 6-connection divider for positive voltage and 6 for negative voltage
4/2 solenoid valve, spring return
4/3 solenoid valve, central spring
Connector for solenoid
Limit switch, with 1 normally closed contact + 1 normally open contact (3 off)
Pressure regulating switch, maximum pressure = 125 bar.
Cable + connector for pressure switches
Cable connection kit - Theory book and practice
